Monthly Data Tab (LT Mode Only)

The Monthly Data shows historical degree day and peak day temperature statistics for the selected weather station. A drop-down box presents the list of weather stations and weather zones. The Monthly Data tab is divided into two panels. The top panel (Chart View) graphically displays the data. The bottom panel (Grid View) numerical displays the data. The full range of historical data is available for viewing. However, the displayed range is based on the Zoom, Date Range, and the Data Range Selection bar.

Chart View

For the selected weather station/zone and concept, the following series are displayed.

  • HDD50. Monthly Heating Degree-Days base 55.
  • HDD60. Monthly Heating Degree-Days base 60.
  • HDD65. Monthly Heating Degree-Days base 65.
  • CDD60. Monthly Cooling Degree-Days base 60.
  • CDD65. Monthly Cooling Degree-Days base 65.
  • CDD70. Monthly Cooling Degree-Days base 70.
  • Peak Day Weather. For each configured peak type, the average temperature on the peak day for the month is displayed.
  • Prior Day Peak Weather. For each configured peak type, the average temperature on the day prior to the peak day for the month is displayed.
  • Station Peak. The average temperature for the day with the highest measured temperature reading.
  • Prior Day Station Peak. The average temperature for the day prior to the day with the highest measured temperature reading.
  • Bad. This displays any data point marked with a Bad status.
  • Filled. This displays any data point marked with a Filled (edited value) status.
  • Incomplete. This displays any data point marked as incomplete because it was computed incomplete daily data.

These series and data status markings may be toggled on or off using the check boxes in the upper right corner of the chart. Data points are viewed by selecting the chart and moving the mouse over the chart.

Grid View

Numerical data for the selected weather station/zone and concept are displayed below the Chart. Filled data are user edited data and are displayed within the grid with a dark background. Data marked as bad are displayed in brown. Incomplete data have a purple background. Monthly Data is read-only. Edits can be made at the daily level and the monthly data can be re-computed using the Calculate Monthly Data Task available on the Weather Station List in the Weather Configuration Dialog.

Actions

The following common actions are available in the View Menu, Action Menu, and on the Toolbar.

In addition to the common actions, the Weather Configuration actions are only available on the Tools Menu in the Weather Module.