ProCoder and Mach10

Itron water modules are compatible with all sizes of ProCoder registers and all water meter sizes that accept ProCoder registers and Mach10 meter models (as long as it meets the parameters described in Table 9).  It is compatible with all sizes and meter types.

Table 9 ProCoder and Mach10 parameters

ERT Module

ProCoder and Mach10 compatibility

100W+ ERT Module, 500W ERT Module

Factory default setting reports up to six left-justified digits. To read an eight-dial register, reprogram using Neptune eight-dial configuration.

Itron Cellular 500W Module

Factory default setting reports an eight-dial output. To read a six-dial register, reprogram using Neptune six-dial configuration.

The following list describes the water modules with which these registers are compatible.

  • ERW-1350-001. 100W+ Encoder, integral connectors for register and optional telemetry device and direct mount remote antenna

  • ERW-1350-002. 100W-R+ Encoder remote, 10-inch cables for register and telemetry device

  • ERW-1601-001. 500W ERT Module, pit variant

  • ERW-1601-002. 500W ERT Module, remote variant

  • ERW-1601-004. 500W ERT Module, pit variant, two port

  • ERW-1601-008. 500W ERT Module, pit variant, two battery, three port

  • ERW-1601-009. 500W ERT Module, pit variant, two battery, two port

  • ERW-1601-010. 500W ERT Module, remote variant, two battery

  • ECW-1700-001. Itron Cellular 500W Module, pit variant

  • ECW-1700-002. Itron Cellular 500W Module, remote variant