ProRead or ProRead AutoDetect

Itron water modules are compatible with all sizes of ProRead and ProRead AutoDetect registers as well as all water meter sizes that accept ProRead or ProRead AutoDetect registers.

Neptune’s ProRead register must be programmed with Neptune ProRead Portable Programmer in the following way:

RF/MIU ID SINGLE

DC: E65N or E49N UC: X

ID: X        00

In this configuration: 

  • the value for X is irrelevant to the ERT because this information is not captured in the ERT module’s standard consumption message (SCM).

  • DC signifies Dial Code. Itron recommends model E65N registers be programmed with this value (for example, six encoded wheels with the resolution of last encoded wheel being zero or five). Itron recommends model E49N registers be programmed with this value (for example, four encoded wheels with the resolution of last encoded wheel being zero through nine).

For ProRead AutoDetect registers, use the same ERT module as those used for ProRead. The ProRead AutoDetect register does not require programming to work with the ERT unless it is connected to an R900 radio module. If the register has been connected to an R900 radio module, reprogram the register to the configuration described above (RF/MIU ID SINGLE...) before connecting the ERT module.

The following list describes the water modules with which these registers are compatible.

  • ERW-0771-425. 60W-R Encoder, remote

  • ERW-0771-215. 60W Encoder, five-foot cable

  • ERW-0771-205. 60W Encoder, inline connector

  • ERW-1300-218. 100W Encoder, 20-inch cable for register, integral connectors for optional telemetry device and direct connect remote antenna

  • ERW-1300-217. 100W Encoder, 20-inch cable for register connection, integral connector for optional direct connect remote antenna

  • ERW-1300-206. 100W Encoder, five-foot cable for register, integral connector for optional telemetry device and direct connect remote antenna

  • ERW-1300-205. 100W Encoder, five-foot cable for register connection, integral connector for optional direct connect remote antenna

  • ERW-1300-203. 100W Encoder, integral connectors for register and optional telemetry device and direct mount remote antenna

  • ERW-1300-202. 100W Encoder, integral connectors for register and optional direct connect remote antenna

  • ERW-1300-318/ERW-1300-418. 100W+ Encoder, 20-inch cable for register, integral connectors for optional telemetry device and direct connect remote antenna

  • ERW-1300-317/ERW-1300-417. 100W+ Encoder, 20-inch cable for register connection, integral connector for optional direct connect remote antenna

  • ERW-1300-306/ERW-1300-406. 100W+ Encoder, five-foot cable for register, integral connectors for optional telemetry device and direct connect remote antenna

  • ERW-1300-305/ERW-1300-405. 100W+ Encoder, five-foot cable for register connection, integral connector for optional direct connect remote antenna

  • ERW-1300-303/ERW-1300-403. 100W+ Encoder, integral connectors for register and optional telemetry device and direct mount remote antenna

  • ERW-1300-302/ERW-1300-402. 100W+ Encoder, integral connectors for register and optional direct connect remote antenna

  • ERW-1300-214. 100W-R Encoder remote, 10-inch cables for register and telemetry device

  • ERW-1300-213. 100W-R Encoder remote, 10-inch cable

  • ERW-1300-314. 100W-R+ Encoder remote, 10-inch cables for register and telemetry device

  • ERW-1300-313. 100W-R+ Encoder remote, 10-inch cable