ProCoder and Mach10

Itron water modules are compatible with all sizes of ProCoder registers and all water meter sizes that accept ProCoder registers and Mach10 meter models (as long as it meets the parameters described in Table 10).  It is compatible with all sizes and meter types.

Table 10 ProCoder and Mach10 parameters

ERT Module

ProCoder and Mach10 compatibility

100W+ ERT Module

Factory default setting reports up to six left-justified digits. To read an eight-dial register, reprogram using Neptune eight-dial configuration.

The following list describes the water modules with which these registers are compatible.

  • ERW-1300-318/ERW-1300-418. 100W+ Encoder, 20-inch cable for register, integral connectors for optional telemetry device and direct connect remote antenna

  • ERW-1300-317/ERW-1300-417. 100W+ Encoder, 20-inch cable for register connection, integral connector for optional direct connect remote antenna

  • ERW-1300-306/ERW-1300-406. 100W+ Encoder, five-foot cable for register, integral connectors for optional telemetry device and direct connect remote antenna

  • ERW-1300-305/ERW-1300-405. 100W+ Encoder, five-foot cable for register connection, integral connector for optional direct connect remote antenna

  • ERW-1300-303/ERW-1300-403. 100W+ Encoder, integral connectors for register and optional telemetry device and direct mount remote antenna

  • ERW-1300-302/ERW-1300-402. 100W+ Encoder, integral connectors for register and optional direct connect remote antenna

  • ERW-1300-314. 100W-R+ Encoder remote, 10-inch cables for register and telemetry device

  • ERW-1300-313. 100W-R+ Encoder remote, 10-inch cable