200WM/200WP remote endpoints

The following list describes the meter types compatible with Itron 1.4 GHz water endpoint modules.

Note: Itron reserves the right to change product, system specifications, and meter compatibility without advance notice.

  • Elster AMCO 

    • Compatible with meter registers: 

      • Encoder: Scancoder, InVISION, Aqua Master, evoQ4

      • Pulser: Digital, V100T

    • Itron meters are not compatible with 1-½ inch and 2-inch imperial gallons, US gallons high speed and cubic feet high speed C700 meters with Elster AMCO Digital registers.

    • ERT Modules are compatible with Elster AMCO Digital registers with tamper reed switch.

    • DC stands for dial code. Itron suggests model E65N registers be programmed with this value (for example, six encoded wheels with the resolution of last encoded wheel being zero or five). Itron suggests E49N registers be programmed with this value (for example, four encoded wheels with the resolution of last encoded wheel being zero through nine).

  • Badger

    • Compatible with meter registers: 

      • Pulser: RTR

      • Encoder: ADE

      • E-Series: ADE

      • HR-E-LCD

    • Badger supplies a cable with RTR for remote ERT Modules.

  • Sensus/Invensys/Precision

    • Compatible with meter registers: 

      • Pulser: PMM (with four-hole blue reed switch housing)

      • Encoder: ICE, ECR III, ECR, ECR WP, AMR System, TR-PL

      • iPERL

    • For ECR III AMR SYSTEM register on PMM meter, refer to ERT part numbers under Invensys/Sensus.

    • Compatible with Precision PMM registers with four mounting holes that accept Precision’s blue housing reed switch assembly with four mounting screws.

  • Hersey/Mueller

    • Compatible with Translator encoder meter register

  • Metron Farnier

    • Compatible with OER encoder meter register

  • Neptune/Schlumberger

    • Compatible with meter registers: 

      • Encoder: ProRead, ProRead Auto Detect, ARB V, E-Coder

      • Neptune’s ProRead register must be programmed with the Neptune ProRead Portable Programmer as follows:

        RF/MIU ID SINGLE

        DC: E65N or E49N UC: X

        ID: X        00

    • Only applies to registers with Elster AMCO protocol.

  • Itron/Actaris

    • Compatible with meter registers: 

      • Pulser: Cyble Sensor K10

      • Encoder: Cyble Coder

  • Hendy Performance Meter

    • Compatible with ETR meter register encoder

  • Severn/Trent

    • Compatible with SmartMeter - Sensus Protocol

  • SeS Siemens

    • Compatible with Mag8000CT - 7ME6820