Device Events
There are no new device events and mappings in this release.
Correcting Duplicate Event Mappings
(Reference: 2680448) The device event mapping script has been modified to correct the duplicate event mappings. Each external code is now mapped to one IEE event code.
When the older event code is not used in any other mapping, the script also corrects existing event filters that refer to this older event code so that the filters refer to the new event code. Some of the older event codes are used in other mappings, in which case event filters that refer to them are not corrected.
The following corrections were made to OpenWay event mappings.
|
External code |
Mapped to IEE event code |
Duplicate mapping (Removed) |
Event filters corrected |
|---|---|---|---|
|
ANSI Security Failed |
18166 | 5Z | Yes |
| Average Voltage High Anomaly | JAVHA | 551 | Yes |
| Average Voltage Low Anomaly | JAVLA | 552 | Yes |
| Average Voltage Restored | JAVR | 553 | Yes |
| Battery Alarm | 18179 | CA | No |
| C12.22 Communication Module Link Reset | 20457 | 2Q | Yes |
| C12.22 Configured Send Failure Limit Exceeded | 20448 | C1LE | Yes |
| Cell Tower Changes Exceed Threshold | 18713 | 5K | No |
|
Comm Link Failure |
18712 |
SS55 |
Yes |
|
Delayed Reset ICM Module Alarm |
18708 |
DRIA |
No |
|
End Device Accessed for Read |
1C |
1A |
No |
|
End Device Programmed |
NPROG |
12 |
No |
|
Event Cache Overflow |
8MEC |
C6 |
No |
|
Extreme Temperature Shutdown |
18703 |
6J |
No |
|
Failure To Set Meter Time |
18692 |
EENF |
No |
|
HAN Channel Change |
18599 |
9OHC |
Yes |
|
HAN Configuration Change |
18602 |
9OCC |
Yes |
|
HAN Device Status Changed |
18518 |
9DSC |
Yes |
|
HAN Gas Module Told To Leave |
18603 |
9OGL |
Yes |
|
HAN Management Leave Requested |
18604 |
9OML |
Yes |
|
HAN Message Published |
18596 |
9P |
Yes |
|
HAN Meter Cold Started |
18605 |
9OMS |
Yes |
|
HAN PAN ID Change |
18600 |
9OPC |
Yes |
|
HAN ZigBee Halted Due To Reset Limiting |
18601 |
9R |
No |
|
ICM Event Log Cleared |
18716 |
C9 |
No |
|
Interrogation Send Failed |
20441 |
5K |
No |
|
Interrogation Send Succeeded |
20442 |
5KOK |
No |
|
Inversion tamper |
18128 |
FP |
No |
|
Magnetic/Cut Tamper_100G |
18655 |
FR1 |
Yes |
|
Meter Communication Fault |
18694 |
43 |
No |
|
Meter Communication Status Alarm |
18709 |
43 |
No |
|
Meter Error Greater Than Maximum Correctable Time Error |
18697 |
5AF |
No |
|
Module Inverted |
18702 |
FP |
No |
|
Primary Power Down |
18001 |
0D |
No |
|
Remote Connect Failed |
18062 |
9IF |
No |
|
Remote Connect Success |
18061 |
9IOK |
No |
|
Remote Disconnect Failed |
18064 |
9HF |
Yes |
|
Remote Disconnect Success |
18063 |
9HOK |
No |
|
Removal tamper |
18129 |
WE |
No |
|
RFLAN Cell Change |
20454 |
NCCC |
No |
|
RMS Voltage High Anomaly |
JRVHA |
554 |
Yes |
|
RMS Voltage Low Anomaly |
JRVLA |
555 |
Yes |
|
RMS Voltage Restored |
JRVR |
556 |
Yes |
|
Sector Changes Exceed Threshold |
18714 |
SS102 |
Yes |
|
Signed Authorization End Time Older Than Meters Time |
32024 |
AGO |
Yes |
|
Signed Authorization Start Time Ahead Of Meters Time |
32023 |
AGA |
Yes |
|
SMS Wakeup Received |
18715 |
SS105 |
Yes |
|
Tamper Tilt Set On Outage |
18717 |
WE |
Yes |
|
Tilt Tamper_100G |
18656 |
FPG1 |
Yes |
|
Voltage Anomaly |
JVA |
0S |
Yes |
|
Voltage Restored |
JVR |
0T |
Yes |
The following corrections were made to TMS & Saturne event mappings.
|
External code |
Mapped to IEE event code |
Duplicate mapping (Removed) |
Event filters corrected |
|---|---|---|---|
| ME6-GE | ME6GE | 5T | No |
| T5PLC_log_1_66 | I7C3 | 46 | No |
| T5PLC_log_4_255 | C9 | FL | No |
UOM Changes
The following UOMs have been added to the UOM update script. See Reference 1958534.
-
KW_DEL_CUM_RATE_A
-
KW_DEL_CUM_RATE_B
-
KW_DEL_CUM_RATE_C
-
W_REC_CUM_RATE_A
-
W_REC_CUM_RATE_B
-
W_REC_CUM_RATE_C
-
KW_REC_CUM_RATE_A
-
KW_REC_CUM_RATE_B
-
KW_REC_CUM_RATE_C
-
W_ELE_DEL_CUM
-
W_ELE_REC_CUM
-
KW_DEL_CUM
-
KW_REC_CUM
-
VAR_ELE_REC_MAX
The following UOMs have been added to the UOM update script. See Reference 2658743.
-
KWH_I3_1
-
KWH_I4_1