Market reading type code table
The reading type code table defines values for __________.
Use the following procedure to configure the reading type code table:
-
Go to System Administration > System Admin > Code Table Setup.
-
From the Code Table Selection list, select Reading Type Code Table.
-
Use the Number of rows to insert on add dropdown menu to select the number of blank rows to add to the code table.
-
From the Code Table Setup menu, click Add. The new rows appear in the table.
-
Click
to select each blank row added and configure the following parameters:-
ID
-
Description
-
-
Click Save.
Tip: After updating any code table, you must restart the IIS service for the changes to take effect.
One of the properties under the data tab for the " D0003 - Half hourly advance " is the " Reading Type" which can have any of the values shown in the following table.
Important! This code table will be supported on the IEE Rich Client at a later date.
|
ID |
Description |
Label |
|---|---|---|
|
A |
Actual Change of Supplier Read |
A - Actual Change of Supplier Read |
|
C |
Customer own read |
C - Customer own read |
|
D |
Deemed (Settlement Registers) or Estimated (Non-Settlement Registers) |
D - Deemed (Settlement Registers) or Estimated (Non-Settlement Registers) |
|
F |
Final |
F - Final |
|
I |
Initial |
I - Initial |
|
M |
MAR |
M - MAR |
|
O |
Old Supplier's Estimated CoS Reading |
O - Old Supplier's Estimated CoS Reading |
|
P |
Electronically collected via PPMIP |
P - Electronically collected via PPMIP |
|
Q |
Meter Reading modified manually by DC |
Q - Meter Reading modified manually by DC |
|
R |
Routine |
R - Routine |
|
S |
Special |
S - Special |
|
T |
Proving Test Reading |
T - Proving Test Reading |
|
W |
Withdrawn |
W - Withdrawn |
|
Z |
Actual Change of Tenancy Read |
Z - Actual Change of Tenancy Read |
|
X |
Supplier Agreed Switch Read |
X - Supplier Agreed Switch Read |