Viewing service point channels linked to validation set

1. Go to Meter Data Management > Validation > Validation Sets.

2. Enter the Validation Set ID and click Build Tree. If you do not know the validation set ID, click Search to open a list of validation sets. Select the validation set and click OK.

3. In the Validation Set tree, click Linked Channels. The channels that are linked to this validation set display in the Service Point Channel list pane.

4. (Optional) Filter the service point channel list by one or more of the following criteria:

   Service Point Filter

   Use the service point filter to display the time periods that the defined service points are linked to the validation set.

   1. Select a Filter Type:

      • Single. Enter a single Service Point ID.

      • Range. A range of service point IDs.

      • List. A list of service points.

   2. Enter the Service Point ID or click Search to open the Search Utility and select a service point. For more information, see

   3. Click Apply to refresh the service point channel list.

   Date Filter

   Use the date filter to display the service point channels that are linked to the validation set during the defined time period.

   1. Select a Time Period.

   2. If you select Custom Period, enter start and end dates.

   3. Click Apply.

   Validation Slot Filter

   1. Use the validation slot filter to display service point channels that are linked to the defined validation slot.

   2. Select the validation slots to include. Clear the checkbox to exclude validation slots.

   3. Click Apply.