Incremental Load Report

This report provides a detailed listing of the settings and monthly parameters for the selected incremental load project(s). It is designed to be an audit report. There are twelve lines in the report for each project.

The report has the following columns:

• Project ID. User-assigned text Project identifier.
• From POD. If the project reduces load on a POD (e.g., a Load Shift to another delivery point) a From POD will be defined.
• Impact Type. This field indicates how the Project KW was determined. Options are Project KW or % of POD.
• To POD. If the project adds load to a POD, a To POD will be defined.
• Impact Size. The project impact in KW.
• Profile Source. The monthly profile type used to create the project.
• Option Type. The calculation option that was used when the project was created.
• Parameter Start Date. If the Option Type is Average from Date Range, the start date of the range will be visible here.
• Parameter End Date. If the Option Type is Average from Date Range, the end date of the range will be visible here.
• Month. The month (1-12).
• Peak Factor. The peak factor gives the % of the maximum project impact that is realized. This factor is a value between 0 and 100.
• Load Factor. The Load Factor is used to compute the energy impact of the project.
• HLH Fraction. The HLH Fractions gives the fraction of Project energy that occurs during high-load hours.
• POD CF. The POD coincidence factor gives the ratio of the project load at the time of the assigned POD peak to the Project peak. This factor is a value between 0 and 100.
• Customer CF. The Customer coincidence factor gives the ratio of the project load at the time of the assigned Customer peak to the Project peak. This factor is a value between 0 and 100.
• System Peak CF(s). For each defined System Peak. The ratio of the System Peak to NCP Peak for a POD. For a customer, this is the ratio of System Peak to CP Peak. This factor is a value between 0 and 100.