Set Time

Prompt the meter or ERT to compare the times of its internal application time clock to its internal network time clock. If the two internal clocks' read times are greater than 48 hours from each other, Field Tools changes the time of the two clocks to the the Field Tools app's time. If the two internal clocks' read times are fewer than 48 hours from each other, Field Tools doesn't change the time of either of the ERT's clocks. When the workflow completes, a results screen indicating the time was set successfully appears. If the workflow doesn't complete, a message appears indicating that the ERT times are okay and the time was not set.

You must have Program Endpoints permission to perform this command.

Set Time prompts you for inputs. The inputs may vary by device. Expand the device type you're working with for its input details.

Gen5 500G ERT Module

Table 287 Set Time command entry fields for Gen5 500G ERT Module
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. Or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

Gen5 Intelis Gas Meter, Gen5 Intelis 250 Gas Meter, Gen5 Intelis 425 Gas Meter

Table 288 Set Time command entry fields for Gen5 Intelis Gas Meter
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. Or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

Intelis Gas Meter, Intelis 250 Gas Meter, Intelis 425 Gas Meter

Table 289 Set Time command entry fields for Intelis Gas Meter
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. Or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

Itron Cellular 500G Module

Table 290 Set Time command entry fields for Itron Cellular 500G Module
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. Or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

Itron Cellular Gen5 500G Module

Table 291 Set Time command entry fields for Itron Cellular Gen5 500G Module
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current TIme	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

OpenWay Riva 500G ERT Module

Table 292 Set Time command entry fields for OpenWay Riva 500G ERT Module
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

OpenWay Riva Intelis Gas Meter

Table 293 Set Time command entry fields for OpenWay Riva Intelis Gas Meter
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the meter's time. Doing so erases all interval data stored by the meter.

Gen5 500W ERT Module

Table 294 Set Time command entry fields for Gen5 500W ERT Module
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

Itron Cellular 500W Module

Table 295 Set Time command entry fields for Itron Cellular 500W Module
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

Itron Cellular Gen5 500W Module

Table 296 Set Time command entry fields for Itron Cellular 500W Module
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

OpenWay Riva 500W ERT Module

Table 297 Set Time command entry fields for OpenWay Riva 500W ERT Module
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.

SBAP

Table 298 Set Time command entry fields for SBAP
Field	Description
Endpoint ID	Type or scan the ID number of the device you are working with. This number is assigned to each device at the time of manufacture. It uniquely distinguishes the device from all others.
Current Time	Compare the date and time displayed here, with the date and time of your mobile device: these values should match each other. If the two date and time values match, continue the workflow. or If the two date and time values do not match, use the back arrow to cancel out of the workflow.
Warning	Press Yes or No to continue the operation with the following understanding: You are about to set the ERT's time. Doing so erases all interval data stored by the ERT.