Change Mode

Use Change Mode to change the ERT module's communication protocol (also called the transmit configuration). The communication protocol determines the frequency and signal strength at which the module transmits the standard consumption message (SCM).

Use the Mode to Program field's drop-down menu to select the communication protocol you want the ERT module to use.

• 100 G Mobbile/HH. Transmits every 9 seconds at +10 dBm.

• 100G Mobile/HH H2R. Transmits every 30 seconds at +24 dBm.

• 100G/Mobile HP. Transmits every 60 seconds at +27 dBm.

For information on switching the ERT or meter from Factory Ship Mode and into an operating mode, see Gen5 and OpenWay Riva ERTs and meters operating mode activation.

You must have Program Endpoint permissions to perform this function.

For descriptions of the results, see Result and success fields.

Supported devices

• SBAP

• Itron Cellular Gen6 500G and 500W ERT Modules

• Riva 500G and 500W Cellular ERT Modules

• All Intelis Gas Meters

• Gen5 500G and 500W ERT Modules

• OpenWay Riva 500G and 500W

• ChoiceConnect 100G and 100W