The current time on device's internal clock (local time).

The length of time this device has been continuously powered up.

Indicates the meter's connection status with the Gen5 network:

• No Radio. Status not available. This can be caused by:
  • The device has restarted and displays this status briefly while the it reboots.
  • The network firmware on this device is not properly configured and the device is in failure state.
• Radio Off. Network access disabled.
  The device is in "Opt Out" status: the meter's 900Mhz radio transmission is disabled.
• No Neighbors. Initialized.
  The device's network stack is running and has begun the neighbor discovery activity.
• Have Neighbors. Network found.
  The device has found a peer neighbor that is connected and can act as a relay.
• Network Registered. Connected.
  The device can successfully communicate on the network.

If the device is unregistered, the device will attempt to register in this length of time. Shown in hours, minutes, and seconds.

A time span during which the device randomly generates a countdown timer until it tries to register again. This is to reduce network traffic.