OpenWay Riva Gas Remote Disconnect (OWR-GRD) Events

The tilt detector has been activated due to physical tampering.

The ERT has detected an external magnetic field.

The ERT has a low battery warning. 10% of battery life remains.

The ERT detects that a remote disconnect valve is attached and it is working properly (triggered when state was previously unknown or previously not working properly).

Note: An OW-GRD endpoint sends this event when it detects valve communication after a "Valve No Comms" event. This is similar to a "Cut Cable End" event when communicating with the valve.

The ERT detects a remote disconnect valve is attached but it is not working properly.

Note: An OW-GRD endpoint sends this event when it detects no valve communication. This is similar to a "Cut Cable Detected" event, but is more explicit for the valve.

The tilt debounce parameter has changed.

Previously defined as: a parameter not related to the meter reading has been reprogrammed.

A critical internal error not described by other events.

A flash error has been detected.

Occurs when the ERT gets pulses or detects consumption for the first time.

The device has been changed to OpenWay Riva network mode.

Any change to the BatteryUseParameters structure results in this event.

The key has been updated in the device.

The application has not received any incoming data which indicates that the device may not be communicating on the network.

The time has been changed manually.

A time change greater than the warning level threshold has been detected.

A time change greater than the warning level threshold has ended and is back below the threshold.

The OpenWay Operations Center (OWCM) configuration in the device has changed.

The Itron event log has been reset.

A new configuration has been downloaded.

A watchdog error. Reboot.

A planned restart of ERT (for example, after firmware download).

The ERT could not adopt configuration information.

The disconnect command was received and has completed.

The disconnect command was received but failed to execute. The event detail will contain the verbose_result attribute of the DisconnectControl object.

The ARM (for reconnect) command was received and has completed. Event detail will contain the verbose_result attribute of the DisconnectControl object.

The ARM (for reconnect) command was received but failed to execute. Event detail will contain the verbose_result attribute of the DisconnectControl object.

The reconnect command was received and has completed. Event detail will contain the verbose_result attribute of the DisconnectControl object.

The reconnect command was received but failed to execute. Event detail will contain the verbose_result attribute of the DisconnectControl object.

An application level security failure - authentication.

This event occurs with an application level security failure for authentication.

An application level security failure - access control.

This event occurs with an application level security failure for access control.

A key rollover command received.

An application level security failure - certificate.

A takeover package was presented and accepted by the ERT.

A takeover package was presented, but rejected by the ERT.

An application level security failure - replay.

A signed authorization with issued-to "Itron-RMA" has been received.

The auto-disconnect sensor configuration has changed (AutoDisconnectConfiguration object).

The valve actuation threshold has been exceeded. This will trigger at a count of 76 actuations for both OW-GRD and Intelis Gas meter.

The OW-GRD valve commissioning process has occurred.

The OW-GRD valve decommissioning process has occurred.

An override operation has occurred for this valve.

An auto disconnect occurred in the device.

An auto disconnect sensor was attached to the OW-GRD device.

An auto disconnect sensor was detached from the OW-GRD device.

An image transfer command was initiated.

An image transfer command was canceled.

An image transfer command was canceled but was not successful.

The process to verify an image has begun.

The image verification process was successful.

The image verification process was initiated, but was not successful.

The image activation process was initiated.

The image activation process was successful.