100W+ Series and 100W ICS Read Endpoint Response Fields

The ERT module’s device identification number.

The meter reading as reported by the ERT module.

The module’s endpoint model (100W+).

• Yes. The module has detected a cut cable.
• No. The module has not detected a cut cable.

• Yes. The module detected a cut cable sometime during the last 24 hours (Fixed Network mode) or during the last 40 days (mobile mode).
• No. The module did not detect a cut cable during the last 24 hours (Fixed Network mode) or during the last 40 days (mobile mode).

• Yes. The module has detected a reverse flow.
• No. The module has not detected a reverse flow.

• Yes. The module has detected a leak.
• No. The module has not detected a leak.

The state of the endpoint battery’s electrical charge.

• Good. The battery's charge is at greater than 10 percent of capacity.
• Bad. The battery's charge is at 10 percent or less of capacity.

Can be either of the following:

• Pulser
• Encoder

The number of times the module received a programming command that affected its metrology.