View Demand Log

Use View Demand Log to retrieve and view a CENTRON R450 Advanced/Bridge meter’s demand log. The log display shows the meter’s responses to the last 16 reset demands, including the command (read current, read previous, or reset demand, status (fail, success, or no previous demand), and the date and time the command was executed. For a reset demand command, it also shows the maximum demand and the time it occurred.

The following diagram summarizes the procedure:

If the meter is fully secured you must retrieve the necessary secure command before you can execute this function (see Retrieving Secure Commands from the FDM Server).

If enhanced security is enabled on the meter, your FDM security manager may have sent a key exchange command for the meter along with the secure commands you retrieved from the server. If so, the mobile application executes the key exchange command before executing any of the secure commands. If you receive an error message indicating a security key mismatch, synchronize your mobile device with the server and then perform a Get Commands command. If you still receive the message after performing these steps, contact an Itron customer support representative.