Home Area Network (HAN)
For the HAN agent to run as expected, all dependent components must meet the agent's minimum supported versions, as described in the following table.
When the agent is installed and running correctly, there are certain messaging expectations you can rely on for assistance with installing and troubleshooting. In addition to the common message types all agents. In addition to unique events and alarms described here, the HAN agent also sends common messages, as described in Common Message Types From All Agents
The following table describes the minimum supported versions for the agent's component dependencies.
|
Component |
|
|---|---|
|
Agent ID(s) |
117571584 |
|
HAN agent current version |
2.0.21 |
|
Agent package size |
816 KB |
|
Minimum supported head-end system versions
|
OpenWay Collection Manager (OWCM) 5.3 SP2 |
|
UtilityIQ 5.0.12 |
|
|
Distributed Intelligence Network Adapter (DINA) 1.0.6 |
|
|
Minimum supported meter firmware version |
10.3.946.1 |
|
Minimum supported AppServ version |
1.5.124.0 |
|
CPU limit |
2 KB |
|
Memory limit |
800 KB |
|
Flash limit |
500 KB |
The following table describes the agent alert messages and conditions during which they are generated. Each of these message/alarms are generated based on the agent's computation. If the condition to trigger alarm on specific phase is satisfied, then it generates one alarm for that phase. This is checked one time at UTC, midnight.
|
Message/alarm name |
Alarm/event |
Message example |
|---|---|---|
|
Unreasonably high Zp |
Generates an alarm message |
4#1#3#0.0643#0.0320 |
|
Unreasonably wide Zp range |
Generates an alarm message |
5#1#2#0.0664#1.2097#1.0000 |
|
Sudden increase in Zp |
Generates an alarm message |
2#1#1#0.0530#0.0475#0.012089#0 |
|
Sudden increase in Zp range |
Generates an alarm message |
4#1#3#0.0643#0.0320 |
|
Broken neutral start |
Generates an alarm message |
6#4#10 |
|
Broken neutral end |
Generates an alarm message |
6#4#11 |